Wireless RF touch panel LED RGB Controller

main-image

Technical Parameters(remote control)
1 Power supply: AAA battery * 3pcs
2 Cover material:ABS
3 Fabrication processing: multicolour printing & UV varnish
Technical Parameters(controller)
1 Working voltage: DC12V
2 Output control: 3 circuits(R/G/B)
3 Control current:6A/circuit
4 Connecting method: common anode
5 Dimension: L66*W64*H24
6 Receiving range:20meters
Functions of Keys1 Key
1: on/off
2 Key 2: light changing mode(15 modes)
3 Key 3:color light/white light switching mode
4 Key 4: turn up(brightness/speed)
5 Key 5: turn down(brightness/speed)

How to use

1 Press Key 1 to turn on/off in any state
2 Press Key 2 to activate light changing mode, a new mode each press,15 modes in total
3 Press Key 3 once to activate white light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring
4 Resume fuction. The previous settings will be resumed while power on again
5 Matching code
Press Key 4 once within 3 seconds when power on again,the light will blink 3 times if matching is successful.
Clearing Code
Press Key 4 five times within 3 seconds when power on again,the light will blink 6 times if clearing is successful

Caution

Please don’t touch or press the color ring while loading the batteries to protect the sensitiveness. Please use the remote controller 3 seconds after the batteries are loaded.Please reload the batteries when you find the color ring is not sensitive.

Connecting Chart

connecting-chart

Dimension

dimension

Feature chart for Key 2

1 Auto color changing 8 grades of brightness to adjust by pressing Key 4 or Key 5
2 Three colors jumps to changes 8 grades of speed to adjust by pressing Key 4 or Key 5 9 Green color jumps to changes 8 grades of brightness to adjust by pressing Key 4 or Key 5
3 Seven colors jumps to changes 10 Yellow color jumps to changes
4 Three colors jumps to gradual changes 11 Cyan color jumps to changes
5 Seven colors jumps to gradual changes 12 White color jumps to changes
6 Red color jumps to changes 8 grades of brightness to adjust by pressing Key 4 or Key 5 13 Red/Blue light twinkles alternately 8 grades of speed to adjust by pressing Key 4 or Key 5
7 Blue color jumps to changes 14 Green/Blue light twinkles alternately
8 Purple color jumps to changes 15 Red/Grenn light twinkles alternately

SEE Our Portfolio for LIVE CLIENT APPLICATION

Pin It on Pinterest

Share This